Omron ZW-7000 Series User Manual page 228

Setting Triggers
Setting Triggers p.147
As an example, here is an explanation of the procedure for selecting the "TIMING" trigger type setting.
Operating procedure
Steps Key operation
1 to 5 For moving to "HOLD", see steps 1 to 5 in p.225.
6
7
8
226
Setting the Output Conditions
Display Description
Press the
Set the trigger method.
TIMING: External
SELF-U: SELF-UP
SELF-D: SELF-DOWN
SELF-V: VALID VALUE
"TYPE" is displayed on the main display and the current setting
value is displayed on the sub-display.
Press
In this example, select "TIMING" and press the
Press the
/ keys to select "TRIG" and press the
/ key to enter editing mode and the sub-display blinks.
key for two seconds to enter the RUN mode.
key.
key.
ZW-7000/5000
User's Manual