Database Identifier Output - Omron MicroHAWK Integration Manual

Database Identifier Output

Database Identifier Output

Usage: Useful in keeping track of which database entries read which symbols.
Serial Cmd: <K759,status,separator>
Default: 0
Options: 0 = Disabled
Output Status
Disabled
When this command is disabled, no database identifier information will be output.
Enabled
When this command is enabled, the reader will append a two-digit number and the characters
"DB" to the data output following the separator for each symbol decoded using Configuration
Database. For example, if the separator is an underscore character and the second database
entry reads a symbol encoded with "data capture" during the read cycle, the symbol data
output will be "data capture_DB02". If the database is not active, no identifiers will be
attached to output.
Separator
Usage: The separator character separates the symbol data from the database identifier.
Serial Cmd: <K759,status,separator>
Default: <space>
Options: Any ASCII character.
8-40
1 = Enabled
MicroHAWK Engine Integration Guide