Step 9 Configure The Reader In Esp - Omron MicroHAWK Integration Manual

Step 9 — Configure the Reader in ESP
Click the App Mode button to make configuration changes to the MicroHAWK Engine.
The following modes are accessible by clicking the buttons in the first row of App Mode icons:
• Click EZ Mode to return to EZ Mode from App Mode.
• Click Autonnect to establish communication (appears as Connect for the ID-40).
• Click Send/Recv to send or receive commands.
• Click Switch Model to open the model menu, to return to a previous reader model, or to
remove a previous reader model.
• Click Parameters to show the tabbed tree controls for Communication, Read Cycle,
Symbologies, I/O Parameters, Symbol Quality, Matchcode, and Diagnostics.
• Click Setup to access a Camera Setup tree control and the tabbed user interfaces for
Video, Evaluation, Calibration, WOI (Window of Interest), Configuration Database,
Ordered Output, Output Format, and Dynamic Setup.
• Click Terminal to display decoded symbol data and to send serial commands to the
reader using text or macros.
• Click Utilities to access the tabbed user interfaces for Read Rate, Counters, Device
Control, Differences from Default, Master Database, and Firmware.
MicroHAWK Engine Integration Guide
Quick Start
1-25