Omron MicroHAWK Integration Manual page 14

Install MicroHAWK USB Drivers
Step 3 — Install MicroHAWK USB Drivers
1. Plug the reader into a USB port and wait for the AutoPlay dialog to appear.
2. Click Open folder to view files and double-click the Double-Click Here.bat batch file.
3. At the command prompt, select option 1 and then type Enter. VCOM and USBLAN
drivers are installed.
4. At the command prompt, select option 3 to install the WebLink and FTP drive shortcuts.
WebLink and MicroHAWK FTP drive shortcut icons will appear on the desktop.
5. When installation of the drivers and shortcuts is complete, unplug the reader from the
USB port.
6. Re-plug the the reader into the USB port and wait for the reader to reboot and to enter
read mode (LEDs ON).
7. Double-click the WebLink desktop shortcut. WebLink will load and start. (See Step 4 –
Connect to WebLink.)
8. Double-click the FTP drive shortcut and log in with username: target and password:
password.
9. The FTP drive is opened so you can access additional resources and installers in the
Tools and Documentation folder.
You are now ready to use the MicroHAWK with WebLink.
Step 1
1-4
Step 3
MicroHAWK Engine Integration Guide