Image Push To Host Detailed Setup - Omron MicroHAWK Integration Manual

Image Push to Host Detailed Setup

Image Storage Location
Definition: Defines where the saved image is going to be stored.
Note: When saving images to RAM, the system is limited to the actual RAM
space available in the system. The number of images that can be saved
depends on the Max RAM Drive Size. The actual system path is /imagesd0/
Images/. When saving images to FTP, the path is <last 6 digits of device's
MAC Address>_Images/ on the host FTP director. Note that the FTP server
needs to grant the user with create directory rights as the system will need to
create a directory on the FTP server to store all uploaded images.
File save scheme: The image file will be posted with its system reset
count, followed by its read cycle i.d., followed by its image i.d., followed by
its stored image type defined in <K763>, as follows:
<last 6 digits of device's MAC Address>_<system total reset count>_<read
cycle id>_<image id>_<save image type>.{png, jpg}
<last 6 digits of device's MAC Address>_<system total reset count>_<read
cycle id>_<image id>_readreport.xml
Serial Cmd: <K764,image storage location,FTP host info,transfer optimization,RAM
drive size in MB,save image until,action at image storage limit>
Default: RAM
Options: 0 = RAM
1 = FTP
FTP Host Info
Definition: mscan|pass@192.168.188.1:21 signifies a the user with mscan at
192.168.188.1 FTP server on port 21 with pass as the FTP login password.
Note: If port is not defined with the FTP server address, it will default to port 21.
Serial Cmd: <K764,image storage location,FTP host info,transfer optimization,RAM
drive size in MB,save image until,action at image storage limit>
Default: "user|pass@xxx.xxx.xxx.xxx:21"
Options: Maximum 255 characters including the characters "|", "@", and ":".
MicroHAWK Engine Integration Guide
I/O Parameters
8-47