Omron MicroHAWK Integration Manual page 104

USB HID/Keyboard
USB VCOM (Virtual COM) Status
Definition: This command enables the USB Virtual COM Port Driver if your reader
supports the driver. The reader will reset so the driver can be used.
<K149,Omron Microscan Report Enabled,Keyboard Report Enabled,Keyboard
Serial Cmd:
Language,USB VCOM Status,UART Status>
Options: 0 = Disabled (Default for ID-40)
1 = Enabled (Default for Engine, ID-20, and ID-30)
UART Status
Definition: This command allows the reader to communicate on the reader's UART if
the reader is UART-capable. The reader will reset so the UART can be used.
<K149,Omron Microscan Report Enabled,Keyboard Report Enabled,Keyboard
Serial Cmd:
Language,USB VCOM Status,UART Status>
Options: 0 = Disabled (Default for ID-20)
1 = Enabled (Default for Engine, ID-30, and ID-40)
4-24
MicroHAWK Engine Integration Guide