Omron MicroHAWK Integration Manual page 92

Ethernet
TCP Port 1
One of two TCP ports for Ethernet communication with the reader. The default setting is 2001.
Symbol Data Output
Enables or disables decoded symbol data output from the reader.
Extra Symbol Information
Enables or disables extra symbol information output from the reader.
Diagnostics Output
Enables or disables diagnostics output from the reader.
External Source Processing Mode
Enables or disables processing of commands or data from sources external to the reader.
Command
Command enables command processing in the reader.
Data
Data enables Ethernet TCP Port 1 as a data source port.
Note: The data path between in the source port and out the source port is always two-way.
Data is copied from source data ports and all those source ports' data is transmitted to the
destination port, and from the destination port to the source port.
4-12
MicroHAWK Engine Integration Guide