Additional Notes Cpu Idle States (C-States) - Omron MicroHAWK Integration Manual

Additional Notes
CPU Idle States (C-States)
During AutoVISION installation, you will see the dialog shown below. The dialog allows
you to disable CPU idle states, also called C-states. The purpose of disabling C-states is
to avoid image drop errors in applications using GigE Cameras with Visionscape, which is
installed with AutoVISION.
Important: Disabling C-states helps you avoid image drop errors, but it also causes the
CPU to run at full speed at all times, significantly increasing power consumption.
MicroHAWK Engine Integration Guide
Quick Start
1-45