Time Since Reset - Omron MicroHAWK Integration Manual

Time Since Reset

Note: Time Since Reset is a read-only command.
Hours
Serial Cmd: <K407,hours,minutes>
Default: 16-bit counter (0 to 65535)
Hours uses a 16-bit counter that increments every 60 minutes.
Minutes
Serial Cmd: <K407,hours,minutes>
Default: 16-bit counter (0 to 60)
Minutes uses a 16-bit counter that increments every 60 seconds.
Note: Time counts are reset at power-on, but not with an <A> or <Z> command.
MicroHAWK Engine Integration Guide
I/O Parameters
8-33