Code 39 - Omron MicroHAWK Integration Manual

Code 39

Usage: Code 39 is considered the standard for non-retail 1D symbology.
Definition: An alphanumeric symbology with unique start/stop code patterns, composed
of 9 black and white elements per character, of which 3 are wide.
Serial Cmd: <K470,status,check character status,check character output status,large
intercharacter gap,fixed symbol length status,fixed symbol length,full ASCII
set>
Default: Enabled
Options: 0 = Disabled
Check Character Status (Code 39)
Serial Cmd: <K470,status,check character status,check character output status,large
intercharacter gap,fixed symbol length status,fixed symbol length,full ASCII
set>
Default: Disabled
Options: 0 = Disabled
Check Character Output Status (Code 39)
Usage: Check Character Output Status, added to the symbol, provides addi-
tional data security.
Definition: When enabled, the check character character is read and compared along
with the symbol data. When disabled, symbol data is sent without the check
character.
Note: With Check Character Output Status and an External or Serial
trigger option enabled, an invalid check character calculation will cause a
No-Read message to be transmitted at the end of the read cycle.
Serial Cmd: <K470,status,check character status,check character output status,large
intercharacter gap,fixed symbol length status,fixed symbol length,full ASCII
set>
Default: Disabled
Options: 0 = Disabled
MicroHAWK Engine Integration Guide
1 = Enabled
1 = Enabled
1 = Enabled
Symbologies
7-9