Data Matrix - Omron MicroHAWK Integration Manual

Data Matrix

Data Matrix

Usage: Very useful where information needs to be packed into a small area, and/or
where symbols need to be applied directly to the substrate with laser
etching, chemical etching, dot peen, or other methods.
Definition: Data Matrix is a type of Matrix symbology and has subsets ECC 000 - ECC 200.
ECC 200 symbols have an even number of rows and an even number of
columns. Most of the symbols are square with sizes from 10x10 to
144x144. Some symbols, however, are rectangular, with sizes from 8x18 to
16x48. All ECC 200 symbols can be recognized by the upper right corner
module being light (binary 0) instead of dark.
ECC 200
Definition: When enabled, will decode ECC 200 Data Matrix symbols.
Serial Cmd: <K479,ECC 200 status,ECC 000 status,ECC 050 status,ECC 080 status,
ECC 100 status,ECC 140 status,ECC 120 status,ECC 130 status>
Default: Enabled
Note: This is the only symbol type enabled by default.
Options: 0 = Disabled
ECC 000
Definition: When enabled, will decode ECC 000 symbols.
Serial Cmd: <K479,ECC 200 status,ECC 000 status,ECC 050 status,ECC 080 status,
ECC 100 status,ECC 140 status,ECC 120 status,ECC 130 status>
Default: Disabled
Options: 0 = Disabled
ECC 050
Definition: When enabled, will decode ECC 050 symbols.
Serial Cmd: <K479,ECC 200 status,ECC 000 status,ECC 050 status,ECC 080 status,
ECC 100 status,ECC 140 status,ECC 120 status,ECC 130 status>
Default: Disabled
Options: 0 = Disabled
7-4
1 = Enabled
1 = Enabled
1 = Enabled
MicroHAWK Engine Integration Guide