Omron MicroHAWK Integration Manual page 303

Configuration Database
QR Code (Add 4)
If enabled, QR Code will be active for this database index.
Code 128 (Add 8)
If enabled, Code 128 will be active for this database index.
Code 39 (Add 16)
If enabled, Code 39 will be active for this database index.
Codabar (Add 32)
If enabled, Codabar will be active for this database index.
Code 93 (Add 64)
If enabled, Code 93 will be active for this database index.
Interleaved 2 of 5 (Add 128)
If enabled, Interleaved 2 of 5 will be active for this database index.
UPC/EAN (Add 256)
If enabled, UPC/EAN will be active for this database index.
PDF417 (Add 512)
If enabled, PDF417 will be active for this database index.
MicroPDF417 (Add 1024)
If enabled, MicroPDF417 will be active for this database index.
BC412 (Add 2048)
If enabled, BC412 will be active for this database index.
Pharmacode (Add 4096)
If enabled, Pharmacode will be active for this database index.
DataBar-14 (Add 8192)
If enabled, DataBar-14 will be active for this database index.
Important: If the stacked and non-stacked operation is required, the DataBar-14 command
must be configured as follows: <K482,2>. If the DataBar-14 status parameter in the
<K482> command is set to either Disabled or Enabled, the reader will only read non-stacked
DataBar-14 symbols.
DataBar Limited (Add 16384)
If enabled, DataBar Limited will be active for this database index.
12-7
MicroHAWK Engine Integration Guide