Interfaces Dataplane <Interface> Firewall Local <Ruleset - Brocade Communications Systems 5600 vRouter Configuration Manual

interfaces dataplane <interface> firewall local <ruleset>
Enables control plane policing (CPP) on a data plane interface by applying a firewall instance or rule set.
Syntax
set interfaces dataplane
delete interfaces dataplane
show interfaces dataplane
Parameters
interface
The name of a data plane interface.
ruleset
A firewall instance or rule set.
Modes
Configuration mode
Configuration Statement
interfaces {
dataplane interface {
firewall {
local ruleset
}
}
}
Usage Guidelines
Use this command to enable CPP on a data plane interface by applying a firewall instance or rule set.
CPP has no effect on traffic that is traversing the vRouter or destined to the vRouter until the firewall rule set has been applied
to the data plane by using this command.
To use CPP, you must first define a firewall rule set as a named firewall instance and then apply the firewall instance to a data
plane interface by using this command. After the firewall instance or rule set is applied to the local keyword, the firewall is
enabled to filter packets that are destined for the system itself.
Use the set form of this command to enable CPP on a data plane interface.
Use the delete form of this command to disable CPP on a data plane interface.
Use the show form of this command to display CPP configuration on a data place interface.
84
interface firewall local ruleset
interface firewall local ruleset
interface firewall local ruleset
Firewall Commands
Brocade 5600 vRouter Firewall Configuration Guide
53-1004253-01