Removing The Server Node From The Server Enclosure - Fujitsu PRIMERGY CX2560 M4 Upgrade And Maintenance Manual

4.3 Removing the server node from the server
enclosure
V
CAUTION!
Shut down the server node and disconnect all external cables.
●
Follow the safety instructions in the chapter
●
on page
The server node bay must not be left open for more than 60 minutes.
●
CX2550/60/70 M4
33.
Upgrade and Maintenance Manual
Basic hardware procedures
"Important information"
Ê Remove the gasket of the lower
server node and keep it for later
use.
Ê Undo the locking mechanism
(1) of the release lever and pull
the server node out of the bay
(2).
Ê Install the gasket of the lower
server node again.
51