Ssd; Installing The M.2 Ssd; Preliminary Steps - Fujitsu PRIMERGY CX2560 M4 Upgrade And Maintenance Manual

9.2 M.2 SSD
The server node can be equipped with two M.2 SSDs.
9.2.1

Installing the M.2 SSD

Upgrade and Repair Unit
(URU)
Tools: Phillips PH1 / (+) No. 1 screw driver
9.2.1.1

Preliminary steps

Perform the following procedures:
"Disabling the boot watchdog functionality of ServerView Operations
Ê
Manager" on page 73
Ê Locate the desired server with the ID button.
"Shutting down the server node" on page 50
Ê
Ê If applicable, remove all external cables from the server node.
"Removing the server node from the server enclosure" on page 51
Ê
Ê Remove the left riser module, see section
page 58.
CX2550/60/70 M4
Upgrade and Maintenance Manual
System board and components
Hardware: 5 minutes
"Removing the riser module" on
271