Before You Start - Fujitsu PRIMERGY CX2560 M4 Upgrade And Maintenance Manual

2

Before you start

Before you start any upgrade or maintenance task, please proceed as follows:
Ê Carefully read the safety instructions in chapter
page 33.
Ê Make sure that all necessary manuals are available. Refer to the
documentation overview in section
page 30. Print the PDF files if required.
Ê Make yourself familiar with the procedure categories introduced in section
"Classification of procedures" on page
Ê Ensure that all required tools are available according to section
need at hand" on page
V
CAUTION
In a system that has the Advanced Thermal Design option, only
components that support the higher operating range may be installed.
Further information on this is available in the configurator.
Installing optional components
The operating manual of your server gives an introduction to server features
and provides an overview of available hardware options.
Use the Fujitsu ServerView Suite management software to prepare hardware
expansions. ServerView Suite documentation is available online at:
http://manuals.ts.fujitsu.com
For Japan:
http://www.fujitsu.com/jp/products/computing/servers/primergy/manual/
Please refer to the following ServerView Suite topics:
– Operation
– Virtualization
– Maintenance
– Out-Of-Band Management
CX2550/60/70 M4
"Documents you need at hand" on
29.
The Advanced Thermal Design option can only be
ordered from the manufacturer and is indicated by the
logo on the identification rating plate.
Upgrade and Maintenance Manual
"Important information" on
25.
"Tools you
23