GPGPU extension tray
10.9
Replacing the GPGPU Riser (R)
10.9.1 Preliminary steps
Perform the following procedures:
"Disabling the boot watchdog functionality of ServerView Operations
Ê
Manager" on page 73
Ê Locate the desired server node with the ID button.
"Shutting down the server node" on page 50
Ê
Ê If applicable, remove all external cables from the server node.
"Removing the server node from the server enclosure" on page 51
Ê
"Removing the GPGPU extension from slot GPGPU 1" on page 328
Ê
applicable)
"Removing the GPGPU extension from slot GPGPU 2" on page 338
Ê
applicable)
"Removing the GPGPU / SXM2 extension tray" on page 53
Ê
10.9.2 Removing the GPGPU riser
Figure 228: Removing the riser (R)
346
Upgrade and Maintenance Manual
(if
(if
CX2550/60/70 M4