Removing Memory Modules; Preliminary Steps - Fujitsu PRIMERGY CX2560 M4 Upgrade And Maintenance Manual

Main memory
7.3

Removing memory modules

Upgrade and Repair Unit
(URU)
Tools: tool-less
7.3.1

Preliminary steps

Perform the following procedures:
"Disabling the boot watchdog functionality of ServerView Operations
Ê
Manager" on page 73
Ê Locate the desired server node with the ID button.
"Shutting down the server node" on page 50
Ê
Ê If applicable, remove all external cables from the server node.
"Removing the server node from the server enclosure" on page 51
Ê
"Removing the memory slot air duct (Air cooling only)" on page 63
Ê
Ê Identify the desired memory slot according to the mounting order, see
section "Memory sequence" on page
V
CAUTION!
Ensure to maintain an operational configuration when removing
memory modules. For additional information, see section
modes" on page
194
187.
Upgrade and Maintenance Manual
Hardware: 5 minutes
185.
"Operation
CX2550/60/70 M4