11.3
Replacing the SXM2 LC
Field Replaceable Unit
(FRU)
Tools:
Preliminary and concluding steps: tool-less
Main steps: PH2 / (+) No. 2 screw
11.3.1 Preliminary steps
Perform the following procedures:
"Disabling the boot watchdog functionality of ServerView Operations
Ê
Manager" on page 73
Ê Locate the desired server node with the ID button.
"Shutting down the server node" on page 50
Ê
Ê If applicable, remove all external cables from the server node.
"Removing the server node from the server enclosure" on page 51
Ê
11.3.2 Replacing the SXM2 LC
Ê Remove the SXM2 LC, see section
page
361.
Ê Apply thermal paste to the SXM2 surface, see section
paste" on page
Ê Install the SXM2 LC, see section
11.3.3 Concluding steps
Perform the following procedures:
"Installing the server node in the server enclosure" on page 67
Ê
Ê If applicable, connect all external cables to the server node.
CX2550/60/70 M4
262.
"Installing liquid cooling (LC)" on page
Upgrade and Maintenance Manual
SXM2 extension tray
Hardware: 15 minutes
"Removing liquid cooling (LC)" on
"Applying thermal
379.
405