Removing A Memory Module; Installing A Memory Module; Concluding Steps; Memory Module Cooling Pads For Liquid Cooling (Lc) - Fujitsu PRIMERGY CX2560 M4 Upgrade And Maintenance Manual

Main memory
7.4.2

Removing a memory module

Ê Identify the defective memory slot.
Ê Remove the defective memory module, see section
modules" on page
7.4.3

Installing a memory module

Ê If applicable, prepare the new memory module, see section
memory modules" on page
Ê Install the new memory module, see section
page 190.
7.4.4

Concluding steps

Perform the following procedures:
"Installing the memory slot air duct (Air cooling only)" on page 64
Ê
"Installing the server node in the server enclosure" on page 67
Ê
Ê If applicable, reconnect all external cables.
"Enabling replaced components in the BIOS" on page 89
Ê
"Controls and indicators on the server node" on page 448
Ê
"Verifying the memory mode" on page 90
Ê
"Enabling replaced components in the BIOS" on page 89
Ê
7.5 Memory module cooling pads for Liquid
Cooling (LC)
7.5.1

Basic information

I
Before installing new memory modules prepare the memory modules
with the cooling pads.
198
194.
201.
Upgrade and Maintenance Manual
"Removing memory
"Installing memory modules" on
(if applicable)
"Replacing
CX2550/60/70 M4