System board and components
9.2.3
Replacing the M.2 SSD
Upgrade and Repair Unit
(URU)
Tools: – Preliminary and concluding steps:
– combination pliers and flat nose pliers
–
Main steps:
– Phillips PH1 / (+) No. 1 screw driver
9.2.3.1
Preliminary steps
Perform the following procedures:
"Disabling the boot watchdog functionality of ServerView Operations
Ê
Manager" on page 73
Ê Locate the desired server with the ID button.
"Shutting down the server node" on page 50
Ê
Ê If applicable, remove all external cables from the server node.
"Removing the server node from the server enclosure" on page 51
Ê
Ê Remove the left riser module, see section
page
58.
9.2.3.2
Removing the M.2 SSD
Ê Remove the M.2 SSD, see section
278
"Removing the M.2 SSD" on page
Upgrade and Maintenance Manual
Hardware: 5 minutes
Software: 10 minutes
"Removing the riser module" on
276.
CX2550/60/70 M4