Cables
12.3
Replacing the Omni-Path PHY card signal
cable and Omni-Path PHY card sideband
cable
Field Replaceable Unit
(FRU)
Tools:
Preliminary and concluding steps: tool-less
Main steps: PH2 / (+) No. 2 screw driver
I
Omni-Path PHY card signal cable and Omni-Path PHY card sideband
cable are only available in combination with the CPU type 2.
12.3.1 Preliminary steps
Perform the following procedures:
"Disabling the boot watchdog functionality of ServerView Operations
Ê
Manager" on page 73
Ê Locate the desired server node using the ID button, see section
on the ID indicator" on page
"Shutting down the server node" on page 50
Ê
Ê If applicable, remove all external cables from the server node.
"Removing the server node from the server enclosure" on page 51
Ê
430
76.
Upgrade and Maintenance Manual
Hardware: 10 minutes
CX2550/60/70 M4
"Switching