Expansion cards and OCP mezzanine cards
Figure 36: Mounting a controller to the riser module
Ê Fasten the expansion card and the gasket with one screw (1).
Ê Plug the expansion card into the SMX2 riser (L) type 2 connector.
6.3.1.3
Concluding steps
Perform the following procedures:
"Installing the SXM2 riser (L) type 2" on page 412
Ê
"Installing the GPGPU / SXM2 extension tray" on page 65
Ê
"Installing the server node in the server enclosure" on page 67
Ê
Ê Reconnect all external cables.
130
Upgrade and Maintenance Manual
CX2550/60/70 M4