Viewing Key List; Figure 6-9 Enter Key Dialog Box - Motorola MC40 Integrator Manual

1 Touch .
2 Touch .
Touch Install Key.
3
4 Touch Manual.
Touch OK.
5

Figure 6-9 Enter Key Dialog Box

In the Enter key text box, enter the key name followed by the key value obtained in step 1, using the following
6
format:
<Key Name> <Key value in Hex String>
Example: key2 1234567890abcdef1234567890abcdef1234567890abcdef1234567890abcdef
The key value must be a 64 hexadecimal character string.
7 Touch OK. The key is imported into the device. The message successfully installed the key appears on
the screen.

6.8.2 Viewing Key List

Procedure Steps
MN000112A01 - September 2013
6.8.2 Viewing Key List
6-21