Speed Dialing Settings - Cisco Linksys RT31P2 Administration Manual

( P5 <:1000> | xxxx )
Explanation of Default Dial Plan
The Default Dial Plan script for each line is:
"(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxx|xxxxxxxxxxxx.)"
Dial Plan Entry Functionality
*xx Allow arbitrary 2 digit star code
[3469]11 Allow x11 sequences
0 Operator
00 Int'l Operator
[2-9]xxxxxx US "local" number
1xxx[2-9]xxxxxx US 1 + 10-digit long distance number
xxxxxxxxxxxx. Everything else (Int'l long distance, FWD, ...)
IP Dialing
If IP dialing is enabled, one can dial [user-id@]a.b.c.d[:port], where '@', '.', and ':' are dialed by
entering "*", user-id must be numeric (like a phone number) and a, b, c, d must be between 0 and
255, and port must be larger than 255. If port is not given, 5060 is used. Port and User-Id are
optional. If the user-id portion matches a pattern in the dial plan, then it is interpreted as a regular
phone number according to the dial plan. The INVITE message, however, is still sent to the outbound
proxy if it is enabled.
4.8.1.

Speed Dialing Settings

If assigned, Speed Dials enable a user to dial a single digit from 2 through 9 and then the "#"
character, to dial the number configured in the PHONE ADAPTER. Speed dials are specified per line.
Parameter Name
Speed Dial 2
Speed Dial 3
Speed Dial 4
Speed Dial 5
Speed Dial 6
Speed Dial 7
Speed Dial 8
Speed Dial 9
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
Description
Target phone number (or URL) assigned to speed dial "2"
Target phone number (or URL) assigned to speed dial "3"
Target phone number (or URL) assigned to speed dial "4"
Target phone number (or URL) assigned to speed dial "5"
Target phone number (or URL) assigned to speed dial "6"
Target phone number (or URL) assigned to speed dial "7"
Target phone number (or URL) assigned to speed dial "8"
Target phone number (or URL) assigned to speed dial "9"
Type Default
Phone
Phone
Phone
Phone
Phone
Phone
Phone
Phone
66