Arjohuntleigh Malibu Sovereign Maintenance And Repair Manual page 49

MRM Malibu/Sovereign
Chassis
Foot end
Shell Gadus S3 A1300C
inside along profile
Locking nut
20 Nm
Loctite 243
Locking nuts
Locking nuts
Lift end
All screws within circles use
torque 12-17 Nm
Locking nuts for actuator or fixed bar (not
illustrated) Tighten with max. 5Nm in order
not to damage the attachment
Shell Gadus S3 A1300C on the
rotation bearings
Loctite 243
Shell Gadus S3
A1300C on these
surfaces
Lockings, Lubrication and Torques
Shell Gadus S3 A1300C on
these surfaces
49
Screw and nut
can be
replaced by
clevis pin and
cotter pin
Screw and nut
can be
replaced by
clevis pin and
cotter pin
Locking nuts,
Tighten with
max. 5Nm
in order not to
damage the
attachment