Table of Contents
Advertisement
MRM Malibu/Sovereign
SP 25 Replace Control Box
Batteries
1. Cut the mains supply
2. Remove the front panel
3. Cut the straps holding battery pack and
cable (a)
CAUTION
To protect the PCB from static
electricity (ESD); Ground yourself
before starting to work.
4. Remove control box lid and remove battery
cabling from the top of the control box
5. Replace battery pack and strap together with
the cable.
6. Attach to J14 on PCB (b) and tighten cable
skin top on box.
7. Check that the LED on the control panel (c)
is flashing green (loading) with mains
connected.
(When the LED changes to a steady state the
battery is fully charged)
8. Attach control box lid and front panel.
a
b
37
Service Procedures
c
Hide quick links:
Advertisement
Table of Contents
