Check/Replace Safety Catch On Lift Arm - Arjohuntleigh Malibu Sovereign Maintenance And Repair Manual

Service Procedures
SP 17 Check/replace safety
catch on lift arm
Lift arm
If the safety catch moves sluggishly or the
spring tension is poor/the spring is broken -
replace. Use safety catch kit.
Safety catch removal:
1. Remove the plastic plugs (a)
2. Drive out the slotted pin (b) and remove the
spring (c)
3. Replace the safety catch (d)
4. Insert the new safety catch spring with
assembly pin. Push down on the spring to
get it in under the transfer casting
5. Drive the slotted pin against the assembly
pin to replace. Stabilize the spring when
doing this
6. Check that the new safety catch moves
smoothly
7. Attach the new plastic plugs.
28
MRM Malibu/Sovereign
d
a
b
c