Replace Safety Belt - Arjohuntleigh Malibu Sovereign Maintenance And Repair Manual

MRM Malibu/Sovereign Service Procedures
SP 21. Replace Safety Belt
Old version:
The safety belt is replaced by unscrewing the
two slide buttons (a) on the chair back frame.
Be sure to fit the belt parts (b) in correct
position and tighten the two slide buttons firmly
a
by hand.
New version 2013 (replacing all old belts as
spare part):
Pull off the old belt and push the new in place
over the two slide buttons (a) with the label
b
towards the seat as shown. The two slide
buttons can also be removed if fitting is
Old version
difficult. In this case be sure to tighten the two
slide buttons firmly by hand.
a
a
New version 2013
33