Table of Contents
Advertisement
modify the selected number to another setting.
6. Press [Enter] to commit to the change or press the [MODE/ESC] button to return to the previous menu.
Ether MaskIP (Subnet Mask)
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Set" option displays, then press [Enter]. The "Set" menu displays.
3. Tap the [Up] or [Down] button until the "Service Setting" option displays, then press [Enter]. The "Service
Settings" menu displays.
4. Press the [Up] or [Down] button until "Ether MaskIP" displays, then press [Enter]. If the Service PIN has not
been correctly applied in the previous menu, this menu will not be accessible. With successful Service
PIN entered, the current IP Subnet mask settings will display. The default Subnet mask address is 255-
000.000.000 with the last octet (000) selected for edit.
5. Use the [Left] or [Right] buttons to change the octet selected, and press the [Up] or [Down] button to
modify the selected number to another setting.
6. Press [Enter] to commit to the change or press the [MODE/ESC] button to return to the previous menu.
Clr Err Info
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Set" option displays, then press [Enter]. The "Set" menu displays.
3. Tap the [Up] or [Down] button until the "Service Setting" option displays, then press [Enter]. The "Service
Settings" menu displays.
4. Press the [Up] or [Down] button until "Clr Err Info" displays, then press [Enter]. If the Service PIN has not
been correctly applied in the previous menu, this menu will not be accessible. With successful Service
PIN entered, the current setting will display. Off is the default setting.
5. Use the [Up] or [Down] buttons to change the selection.
6. Press [Enter] to commit to the change or press the [MODE/ESC] button to return to the previous menu.
Fans Mode Setting
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Set" option displays, then press [Enter]. The "Set" menu displays.
3. Tap the [Up] or [Down] button until the "Fans Mode Setting" option displays, then press [Enter]. The "Fans
Mode Set" menu displays.
4. Use the [Up] or [Down] buttons to modify the setting ("Standard", "Studio", or "Continuous").
5. Press [Enter] to commit to the change or press the [MODE/ESC] button to return to the previous menu.
Disp. Setting
This menu provides user setting for the display features.
Shutoff Time
This menu sets the amount of time after the last user interface button press until the display goes to sleep. By
default, this setting is 5 minutes.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Set" option displays, then press [Enter]. The "Set" menu displays.
3. Tap the [Up] or [Down] button until the "Disp. Setting" option displays, then press [Enter]. The "Disp. Set-
tings" menu displays.
4. Press the [Up] or [Down] button until "Shutoff Time" displays, then press [Enter]. The current shut off time
displays. By default this setting is 5 minutes.
32
Advertisement
Table of Contents
