Chapter 3. Using the Settings Menu
3.10 Service Menu Options
This menu includes the three options described below.
3.10.1 Software Update
When an external USB drive containing a moisture.IQ software update file is connected, the Software Update
button will be enabled. Proceed as follows:
1. Tap the Software Update button.
2. Tap Yes at a screen similar to Figure 42 below to confirm your choice, or tap Cancel to abort the
update.
3. The new software will be installed automatically and you will be prompted to tap a Restart button to
complete the process.
Note: Your system configuration settings will not be affected by the software update.
3.10.2 Restart
To restart (i.e., reboot) the moisture.IQ system, tap the Restart button. Then, tap either Yes or No at a
confirmation screen similar to the one shown in Figure 30 on page 35.
3.10.3 Shut Down
To shut down the moisture.IQ system, tap the Shut Down button. Then, tap either Yes or No at a confirmation
screen similar to the one shown in Figure 31 on page 36.
48
Figure 42: Software Update Confirmation Screen
moisture.IQ User's Manual