Updating The Moisture.iq Module Firmware - GE moisture.iq User Manual

C.2 Updating the moisture.IQ Module Firmware
1. Load the updated firmware into the UPDATE folder on the USB flash drive.
2. Plug the USB flash drive (with the software update) into the moisture.IQ (see Figure 91 for
Rack/Bench/Panel Mount, Figure 92 for Weatherproof/Explosion-Proof.).
moisture.IQ User's Manual
Figure 91: USB Flash Drive Plugged into Rear of Chassis
Figure 92: USB Flash Drive Plugged into Chassis Inside the Door
Appendix C. Updating the moisture.IQ Firmware
121