User Management Operations - GE moisture.iq User Manual

Chapter 6. Setting Up Communications

6.7 User Management Operations

The User Management option allows you to set up and control access to the moisture.IQ for Web Server and
VNC users (see previous sections). Tap the button for the designated communication option to enter
parameters. to use this option, proceed as follows:
1. From the Configuration Menu screen (see Figure 52 on page 59), tap the User Management button to
open the Log In screen (see Figure 70 on page 79).
2. Tap the User button and select either Admin or Operator from the drop-down list.
3. Tap the Password text box and use the keypad to enter your assigned password. Then, tap the Check
button to enter your password.
4. Tap the Log In button to open the Remote User Management screen (see Figure 71 on page 80).
5. To add a new user (up to three total) tap the Add User button in the top right corner of the screen. Then,
complete the User , Password and Confirm Password text boxes. When finished, tap the Check button
and then the Return button.
6. To Set User Access, tap the User button and select the desired user from the drop-down list. Then, use
the Remove and Change Password buttons to configure this user account as desired.
7. Use the two buttons at the bottom of the screen ( Change Settings and Remote Access ) to set the
permissions for the selected user. Buttons highlighted in blue indicate that the user has access to those
operations.
8. When you are finished, tap the Return button twice to return to the Configuration Menu.
84 moisture.IQ User's Manual