GE moisture.iq User Manual page 82

Chapter 5. Using the Configuration Menu
5.4.1 Entering User Functions (cont.)
3. Tap the User Function button to select the function name ( Func 1 , Func 2 , Func 3 or Func 4 ). Then, tap
the large text box just below the Channel button to open the Channel x:User Function y screen, as shown
in Figure 61 below, to enter the function equation. When the equation is complete, tap the Check
button to return to the User Function Setup screen.
The buttons in Figure 61 above permit the inclusion of standard mathematical functions, lookup data from
predefined user tables (see "Entering User-Defined Tables" on page 71). The Check Math button is used to find
any errors in the equation definition. Also, you may tap the Clear All button at any time to start over. The
Copy and Paste buttons at the top right corner of the screen may be used to duplicate information from one
user function to another to avoid entering the same information multiple times.
Note: To assist in entering the user function, the current definition is shown at the bottom center of the User
Function Setup screen as the following selections are made.
4. Tap the Function Label text box to open the Edit Function Label screen and use the keyboard to enter the
desired label.
5. Tap the Unit text box to open the Edit Unit Label screen and use the keyboard to enter the desired units.
6. Tap the Decimals text box and enter the desired number of decimal places for the function ( 1 - 6 ).
7. Tap the Max and Min text boxes to enter the Valid Range for the function in digits from the keypad.
8. After the functions has been defined, tap the Return button to return to the Configuration Menu.
70
Figure 61: User Function Equation Screen
moisture.IQ User's Manual