Ge Field Service Engineer (Fse)-Supplied Items; Customer-Supplied Items - GE Intellix BMT 330 Installation Manual

Qty Description
1 ▪ Heat shrink ¼ in. tubing 60 mm (2.4 in)
6 of Cable markers P, S, N, 1, 2, 3 and 4
each
(N x8)
1 P/N: CONS01149 - MG Carbon Electrically Conductive Grease
846
1 Thermal jointing compound (Wakefield Engineering, 120 series)
(GE P/N: CONS01026)
Ethernet cable Ferrite (Würth 7427 154) when optional copper
1
Ethernet module is ordered (GE P/N: ELEC04004)
> One spare O-ring for each bushing adaptor is supplied
B.2

GE Field Service Engineer (FSE)-supplied items

If GE performs the installation, the GE FSE will bring the following items:
Table B-2: GE FSE-supplied items
Qty Description
1 Handheld multimeter 4½ digit with:
▪ Testing continuity capability
▪ AC voltage measurement (0.5%)
▪ Resistance measurement (0.5%)
(Suggested model: Fluke 87 or 287 or equivalent).
> Required material as described in 'Appendix D - Bushing Adaptor
Circuit Integrity Test Record' of the Intellix BMT 330 Installation
Manual.
1 27 mm socket to fit ½ in. square drive torque wrench
1 ½ in. square drive torque wrench with a capable range of 10 -
100 Nm (7 – 73 lb ft)
1 1.25 N m torque screwdriver
1 3 mm ball hex blade for torque screwdriver
1 Ratchet crimp tool.
B.3

Customer-supplied Items

The following items are procured by the customer:
Table B-3: Customer-supplied items
Qty Description
1 Armoured mains cable to power the product.
1 Grounding cable to connect primary protective earth terminal
lug of the product cabinet to the ground.
MA-017 – BMT 330 Installation Manual – Rev 3.3 4-Mar-22 Page 42 of 69