GE moisture.iq User Manual page 30

Chapter 1. Installation
1.9.3.1 M-Series Probes (cont.)
Note: Additional M-Series probes may be connected to CH4 , CH5 and CH6 in the Module B connector group on
the right side of the back panel.
If you connect a probe to the wrong channel, you can either reconnect the probe to the assigned channel or
reconfigure the current channel as described in "The Probe Configuration Screen" on page 60.
WARNING! The M-Series probe may not be capable of withstanding the 500V insulation rating. This
must be taken into account in any installation in which it is used.
18
Module A - CH1
Module A - CH2
Module A - CH3
Figure 13: M-Series Probe Connections
M-Series Probe Connections
moisture.IQ User's Manual