Chapter 5. Using The Configuration Menu; Configuring The Probes - GE moisture.iq User Manual

Chapter 5. Using the Configuration Menu

Chapter 5. Using the Configuration Menu

5.1 Configuring the Probes

After establishing the meter settings, you must configure and calibrate the attached probes. Although the
probes are physically connected to the back of the electronics unit, you must program the moisture.IQ with the
type of measurements you need the probe to make. In addition, if you want to use a constant value rather than
a live input, or if you want to apply a user function, you must program the moisture.IQ accordingly. If you do
not activate the probes, or if you activate them incorrectly, the meter will display No Probe or other error
messages.
Refer to the menu map in Figure 78 on page 111 and tap the Configuration button on the main screen to open
the Configuration Menu (see Figure 52 below).
Figure 52: Configuration Menu Screen
moisture.IQ User's Manual 59