5.4 Entering User Information
Refer to the menu map in Figure 78 on page 111 and to Figure 52 on page 59 (the Configuration Menu screen)
to enter the following types of user information:
•
User Functions (see "Entering User Functions" on page 69)
•
User Tables (see "Entering User-Defined Tables" on page 71)
•
User Constants (see "Entering User Constants" on page 72)
•
Saturation Constants (see "Entering Saturation Constants" on page 73)
5.4.1 Entering User Functions
User Functions permit the programming up to four mathematical equations on each channel. Any parameter
on any channel can be used to calculate a different parameter. To enter a new user function or to edit an
existing function, complete the following steps:
1. Tap the User Function button on the Configuration Menu screen (see Figure 52 on page 59) to open the
User Function Setup screen (see Figure 60 below).
2. Tap the Channel button to select the channel where the function will be applied.
moisture.IQ User's Manual
Figure 60: User Function Setup Screen
Chapter 5. Using the Configuration Menu
69