LSI 3ware 9750 User Manual page 98

Chapter 7. Configuring Units
86
Tip:
If you want to use all available drives, press
them all.
Figure 43. Asterisks Next to Selected Drives
2 After all drives for the unit are selected, Tab to the
press .
Enter
Tip:
You can also press
3 On the
Create Disk Array
listed.
Figure 44. Create Disk Array screen
4 (Optional) Press Enter
again to set the name.
3ware SATA+SAS RAID Controller Card Software User Guide, Version 10.2
Alt-C
to choose Create Unit.
screen, make sure that the proper drives are
and type a name for the unit; then press
Alt-A
to select
Create Unit button and
Enter