LSI 3ware 9750 User Manual page 47

www.lsi.com/channel/products
Figure 18. 3ware BIOS Screen
----Press <Alt-3> to access 3ware BIOS Manager ----
3ware ATA RAID Controller: 9750-4I
BIOS: BE9X X.XX.XX.XXX
BBU Status: Not Present
Number of online units: 1, available drives: 0, hot spare: 0, offline units:0
Available drives:
SATA - SAMSUNG
Exportable Units:Œ
3drive 64K RAID5
SATA - SAMSUNG
SATA - SAMSUNG
3 Press Alt-3 or 3 immediately to bring up the
.
(3BM)
Normally your 3ware configuration remains on-screen for just a few
seconds. However, if a unit has degraded, the screen indicates the
problem and remains on your screen longer.
4 If you plan to make changes to your configuration and need to backup
data before continuing, press
key to continue.
If 3BM detects a degraded array, a red message box appears, to alert you
to the problem. For information about rebuilding a degraded array, see
"About Degraded Units" on page 138.
5 If you have more than one 9750 controller in your system, a screen lists
the available boards (see Figure 19).
Figure 19. 3ware Controller Board Selection Screen
If you have more than four boards, you see only four at first (only four
can be processed at a time). After you exit from 3BM, you can access the
BIOS again, to access the remaining boards.
Firmware: FE9X X.XX.XX.XXX
HD160JJ 149.04 GB
298.00 GB (Zygote3) DEGRADED
HD160JJ 149.04 GB
HD160JJ 149.04 GB
3ware BIOS Manager
and do so now. Otherwise, press any
ESC
Starting 3BM
Phy 0
(Phy 3)
(Phy 1)
35