LSI 3ware 9750 User Manual page 358

Appendix B. Driver and Software Installation
346
format, and Keyboard or input method. Click
Now .
2 Accept the Microsoft License Terms and click
3 When the message "Which type of installation do you want:?" appears,
click
Custom (advanced).
4 When the message "Where do you want to install Windows?" appears,
click Load Driver .
5 Insert the media with the 3ware driver. It can be a floppy, USB flash
drive, CD, or DVD. Once inserted, select
the location of the driver.
6 When the message "Select the driver to be installed" appears, choose
3ware 9750 RAID Controlle
7 Continue with the normal Windows installation at this point. There are no
instructions after installing the driver that are specific to 3ware. If you
need additional instructions, refer to the Windows documentation
supplied by Microsoft.
8 Follow the instructions under "Partitioning, Formatting, and Mounting
Units" on page 90.
Installing the 3ware Driver on a Windows System that
Boots from a Different Device
If you are installing the 3ware RAID controller on a system that already has a
Windows operating system boot device, follow the instructions in this section.
If you will be using a unit managed by the 3ware RAID controller as your
boot device, see "Installing the 3ware Driver and Windows on a New RAID
Unit" on page 345.
Note:
It is easiest and simplest to install the driver before you install the 3ware
RAID controller card. If you install the controller card fist, when Windows displays
the Found New Hardware wizard, cancel the prompts. Then continue with the
procedure below.
To install the 3ware driver with the Device Driver Install Wizard
1 Insert the 3ware CD into your CD-ROM drive. Click
license agreement.
The 3ware menu appears.
2 Click Install Windows Drivers
3ware SATA+SAS RAID Controller Card Software User Guide, Version 10.2
and then click
Next
Next .
Browse or
r and click Next .
.
Install
OK and navigate to
LSI
Agree at the LSI