LSI 3ware 9750 User Manual page 96

Chapter 7. Configuring Units
84
Figure 40. Configuring a Unit in 3DM2
4 In the field, select the RAID configuration you want.
Type
5 If stripe size applies to the RAID type you select, select a
(Stripe size does not apply to RAID 1.)
6 Optional: In the Name
including dashes and underscores).
7 If you have 12 drives attached to the controller and selected RAID 50 as
the configuration in step 3, select whether you want 3, 4, or 6 Drives Per
Subunit, as shown here.
Figure 41. Configuring a RAID 50 with 12 Drives
8 Make changes to the unit policies, as desired. You can enable or disable
the Write Cache , Auto-Verify
policy, the
StorSave
policy
For details about these settings, see "Setting Unit Policies" on page 100.
3ware SATA+SAS RAID Controller Card Software User Guide, Version 10.2
box, enter a name for the unit (up to 21 characters,
, and Overwrite ECC
Rapid RAID Recovery
Stripe Size
. You can also set the
policy, and the
Read Cache
.