Chapter 6. Configuring Your Controller
78
To change the phy link speed in 3BM
1
On the main 3BM screen,
2
On the pop-up menu, select
3
On the Controller Phy Policies page, use the arrow keys to select the Phy
for which you want to set the link speed.
4
Press
Enter
to display a popup of the possible settings, select the one you
want, and press
Enter
Figure 38. Controller Phy Policies page
3ware SATA+SAS RAID Controller Card Software User Guide, Version 10.2
to
and press
Tab
Settings
and press
Phy Policies
again.
.
Enter
.
Enter