LSI 3ware 9750 User Manual page 237

3DM2 Settings page
E-mail Notification
Use the fields in this section to set up and manage notifications of events by e-
mail.
Send E-mail. This field determines whether e-mail notification is Enabled or
. It is a good idea to enable this feature, so that you receive email
Disabled
when your units or drives have problems.
Specifies the type of events for which notifications should be sent.
Notify On.
A severity of Information will send e-mails for all alarms, a severity of
will send e-mail for alarms with severity of Warning and Error. A
Warning
severity of Error will send e-mail for alarms with severity of Error.
Enter the email address which will appear in the "From" field.
Sender.
The e-mail address to which notifications should be sent. You can
Recipient.
enter multiple addresses, separated by commas (,).
If the machine on which you are running 3DM2
Mail Server (name or IP).
has access to a name server, you may enter the machine name of the mail
server in the Server field. Otherwise, use the IP address.
Mail Server Login. If your email server requires authentication, enter the
login for the server. If you are uncertain of the login, contact the administrator
of the email server.
Mail Server Password. If your email server requires authentication, enter the
password for the Mail Server login.
Mail Server Port uses SSL . If your mail server requires or supports
encrypted email, set this to . For more information, See "Managing E-mail
Yes
Event Notification" on page 59.
Saves the e-mail notification settings.
Save E-mail Settings button.
Sends a test message using the saved e-mail
Send Test Message button.
settings.
Password
Use the fields in this section to set the passwords for the User and
Administrator. When 3DM2 is first installed, the default password for both is
.
3ware
Select the access level for which you are setting the
Change Password For.
password: User or Administrator . Users can only view status information in
3DM2, while Administrators can make changes and administer the controller
and associated drives.
Enter the current password.
Current Password.
New Password. Enter the new password.
www.lsi.com/channel/products 225