LSI 3ware 9750 User Manual page 34

Chapter 2. First-Time RAID Configuration Using 3BM
22
To set other policies for the unit
While creating a unit through 3BM, you can set a number of unit policies.
Each of these policies is already set to a default value, so you do not have to
change them.
Many of these options are listed on the Create Disk Array screen. A few are
available through the Advanced Options screen.
1 Use the arrow keys to move through the policies shown on the screen,
select the option you want and press Enter to choose it.
2 Press Tab to the Advanced
options screen, where additional policies are available.
For details about the various unit policies, see the following sections:
• "Enabling and Disabling the Unit Write Cache" on page 102
• "Working with Read Cache Settings" on page 104
• "Setting the StorSave Profile for a Unit" on page 111
• "Enabling or Disabling Auto-Verify for a Unit" on page 107
• "Rapid RAID Recovery" on page 113
• "Enabling and Disabling Queuing for a Unit" on page 110
• "Setting Overwrite ECC (Continue on Source Error When Rebuilding)"
on page 108
• "Initialization Method" on page 81
Figure 14. Create Disk Array Advanced Options screen
To create a boot volume of a particular size
You can specify a portion of the unit you create to be used as a boot volume.
This option is useful if you install your operating system onto the unit and
want to have a designated volume for the OS. The remainder of the unit is
created as a separate volume (or volumes if auto-carving is also used.).
3ware SATA+SAS RAID Controller Card Software User Guide, Version 10.2
button and press Enter to open the Advanced