LSI 3ware 9750 User Manual page 118

Chapter 7. Configuring Units
106
Figure 60. Read Cache policy on the Controller Settings page
After you change the selection, the page refreshes, and a message at the
top confirms the change you have made.
To change the Read Cache unit policy In 3BM
1 At the main 3BM screen, select the unit by highlighting it and pressing
Enter .
An asterisk appears, indicating that the RAID unit is selected.
2 to the
Tab Maintain Unit
3 On the pop-up menu, select
4 In the Configure Disk Array screen,
Setting .
The current setting—Intelligent, Basic, or Disabled—is shown.
3ware SATA+SAS RAID Controller Card Software User Guide, Version 10.2
button and press .
Enter
and press
Configure
to the field
Tab
.
Enter
Read Cache