LSI 3ware 9750 User Manual page 235

www.lsi.com/channel/products
If supported by the enclosure manufacturer, checking this box will
Identify.
cause an LED to blink on the enclosure containing the specific temperature
sensor. If the box is grayed, identify is not supported.
Power Supply Summary
Power Supply . The ID number associated with the specified power supply.
Status . Can be OK, Failure, Not Installed, Off, or Unknown. For status
definitions, see "Power Supply Status" on page 183.
State . Indicates if the power supply is ON or OFF.
.The status of the dc voltage output of the power supply. Can be
Voltage
Normal, Over Voltage, Under Voltage, or Unknown.
Current . The status of the dc amperage output of the power supply. Can be
Normal, Over Current, or Unknown.
If supported by the enclosure manufacturer, checking this box will
Identify.
cause an LED to blink on the enclosure containing the specific power supply.
If the box is grayed, identify is not supported.
Slot Summary
Lists the enclosure slots and indicates which ones contain
Slot Summary.
drives, and the status of each drive.
The ID of the slot for a drive in the enclosure.
Slot.
The status of the drive in the slot. Can be
Status.
Ready To Remove , or Activated
The VPort assigned to the drive in the slot. Clicking the link takes you
VPort.
to the Drive Information page. The drive you selected will be highlighted.
Identify. Check the box to cause the LED associated with that slot to blink.
Enclosure Details page
Inserted
.
, ,
Ready To Insert
223