LSI 3ware 9750 User Manual page 75

www.lsi.com/channel/products
Enable or Disable 3DM2 Command Logging
1 Click 3DM2 Settings
2 In the
Server Configuration
either Enabled or Disabled
Figure 29. Command Logging setting on 3DM2 Settings page
Note:
The command logging control in 3DM2 only determines whether or not
commands are logged from the 3DM2 interface. Command logging is also available
for configuration changes made through the CLI. However, control of whether CLI
command logging is enabled or disabled is handled separately. Changing the
setting within 3DM2 does not affect command logging from CLI.
For more information, see the 3ware SATA+SAS RAID Controller Card CLI Guide,
Version 10.2.
Setting Up 3DM2 Preferences
on the 3DM2 menu bar.
section of the 3DM2 Settings page, select
in the Command Logging field.
63