LSI 3ware 9750 User Manual page 53

www.lsi.com/channel/products
system. You can set a pause time of up to 10 seconds. The default is 6
seconds.
Full Screen Control . When you have many drives attached to a controller
and choose to display the Full level of detail, the information can extend
beyond a screens' worth. The Full Screen Control setting lets you specify
whether to wait for a keystroke when the screen is full, before displaying
additional information. This option can be either
BIOS Loading Options
This setting is enabled by default. It allows you to boot from
Load Control.
RAID units or drives managed by the controller. If this setting is disabled, you
will only be able to boot from hard drives or peripheral devices (such as CD-
ROM or floppy) that are not managed by the controller. You might want to
disable this setting if you have multiple controllers in a "headless" system
with no monitor or keyboard.
Options for Entering BIOS
The default key combination for entering the BIOS is Alt-3 or 3. If
Hot Key.
you want, you can change this key combination to Ctrl-6 or 6.
To control access to the BIOS setup program, you can
Require Password.
enable a security password. If you enable the password function, you must
then specify a password.
This field is where you will enter a password if you have
Change Password.
enabled the
Require Password
BIOS. If you forget your password, use the alternate password: go3ware. If
that does not work you can reflash your controller to reset the password.
Note:
During the boot process, you also can bypass loading of the BIOS for all
controllers for one time only by pressing
to temporarily boot from a non-3ware device without having to change the system's
boot order.
Adjusting BIOS Option Settings
No Key
setting. This password controls access to the
Alt-B .
Bypass loading the BIOS is useful
or .
Wait Key
41