LSI 3ware 9750 User Manual page 121

www.lsi.com/channel/products
• Under FreeBSD use the fsck command.
• Under Linux use the fsck command.
• Under Mac OS X, you can use the First Aid tab in the Disk Utility—
select the disk on the left and then click
encounters problems, you can then use the
same screen.
• Under OpenSolaris you should follow your operating system's guide to
perform a file system check.
• Under VMware you should follow your operating system's guide to
perform a file system check.
• Under Windows, you can do this by right-clicking on the Drive and
choosing Properties; then on the Tools tab, click Check Now.
To set the Overwrite ECC policy in 3DM2
1 Choose Management >> Controller Settings
3DM2.
2 In the
Unit Policies
boxes to select the policies you want to be in effect for each unit
The page refreshes, and a message at the top confirms the change you
have made.
To set the Continue on Source Error When Rebuilding policy in
3BM
1 At the main 3BM screen, select the unit by highlighting it and pressing
Enter .
An asterisk appears in the left-most column to indicate that it is selected.
2 Tab to the
Maintain Unit
3 On the pop-up menu, select
4 In the
Configure Disk Array
Source Error When Rebuilding
5 Press Enter to display the choices, use the
setting you want (Enabled or Disabled), and press
it.
6 to the button and press
Tab OK
You return to the main 3BM screen.
Verify Disk
Repair Disk
section of the Controller Settings page, check the
button and press
Enter
and press
Configure
screen, to the field
Tab
.
arrow keys
to select it.
Enter
Setting Unit Policies
. If verification
option on the
from the menu bar in
.
.
Enter
Continue on
to select the
again to choose
Enter
109